樓承板壓機的研究與開發已經在各個地方進行了試驗,這是輕鋼發展的重要方向。當前,存在各種低層,多層和高層設計解決方案和示例。 樓承板質量的提高對建筑活動有很大的影響。
The research and development of floor bearing plate press has been tested in various places, which is an important direction of the development of light steel. At present, there are various low-level, multi-layer and high-level design solutions and examples. The improvement of floor bearing plate quality has a great impact on construction activities.
加固的桁架樓承板承重板在舉升過程中應輕輕舉起和放下,并且不得碰撞以防止發生變化。加固的桁架樓承板可通過特殊的吊架進行裝卸,這些吊架由角鋼或槽鋼制成,并帶有軟帶。請勿使用鋼纜直接懸掛,因?yàn)殡娎|的邊緣會在提升過程中使板的邊緣變形。重復使用后,必須對軟吊索進行匹配并立即進行徹底檢查。如果損壞,則必須報廢并更換。如果沒有可用的特殊衣架,則應在其下方放置一個軌枕。如果將鋼筋桁架樓承板承重板堆放在起吊位置,則應根據布置圖和包裝標記進行堆放,并且吊起過程應同時進行。
The reinforced truss floor bearing plate and bearing plate shall be gently lifted and lowered during lifting, and shall not collide to prevent changes. The reinforced truss floor support plate can be loaded and unloaded through special hangers, which are made of angle steel or channel steel with soft belts. Do not use the steel cable to hang directly, because the edge of the cable will deform the edge of the plate during lifting. After reuse, the soft sling must be matched and thoroughly inspected immediately. If damaged, it must be scrapped and replaced. If no special hanger is available, a sleeper shall be placed under it. If the bearing plates of steel truss floor bearing plates are stacked at the lifting position, they shall be stacked according to the layout and packaging marks, and the lifting process shall be carried out at the same time.
樓承板壓制設備的鋼結構的建造是一個自下而上的過程,該過程從不完整逐步完成。隨著施工過程中結構形式的變化。不同的施工階段具有不同的結構形式和結構。由于其應力特性,每個施工階段的內部和外部載荷條件也不同。
The construction of steel structure of floor bearing plate pressing equipment is a bottom-up process, which is not completed completely and gradually. With the change of structural form during construction. Different construction stages have different structural forms and structures. Due to its stress characteristics, the internal and external load conditions of each construction stage are also different.
桁架樓承板有效地提高了其使用的建筑材料和產品的質量水平。這是非常重要和重要的。它對建筑活動具有非常積極和重要的影響。這對消費者來說非常重要。
Truss floor support plate effectively improves the quality level of building materials and products. This is very important and important. It has a very positive and important impact on construction activities. This is very important for consumers.
The above is the main content shared by Jinan floor support plate. Please continue to pay attention to us for more wonderful contents: http://plisse.cn