亚洲一区播放,波多野结衣被躁,中日韩高清在线观看的,三上悠亚免费视频

從事濟南彩鋼板房,彩鋼瓦,復合板,巖棉板,C型鋼,濟南鋼結構的廠家
服務電話:0531-83658718
熱門搜索:濟南方管,濟南彩鋼瓦,濟南巖棉板,濟南型鋼,濟南樓承板,濟南泡沫復合板
公司動態 所在位置- 首頁-新聞中心-公司動態加工所用原材料為直接成型的C型鋼和Z型鋼有分別

加工所用原材料為直接成型的C型鋼和Z型鋼有分別

發布時間:2022-06-21 來源:http://plisse.cn/

加工所用原材料為鋼板或直接成型的C型鋼和Z型鋼而言,很多人認為這兩種鋼材除了型號沒有區別,尤其是在我們選擇墻體材料的時候。兩者都可以使用。事實上,這兩種鋼是不同的。那么它們之間有什么區別,我們一起來看看:
The raw materials used for processing are steel plate or directly formed C-section steel and Z-section steel. Many people think that there is no difference between the two steels except for the model, especially when we choose wall materials. Both can be used. In fact, the two steels are different. Let's take a look at the differences between them:
濟南型鋼廠家推薦看看Z型鋼檁條和C型鋼檁條的外觀就知道了。角度不同。C型鋼檁條為90度,而Z型鋼檁條小于90度,約為60-75度。因此,在有一定坡度的屋頂上使用檁條時,需要將檁條組合起來。
Jinan profile steel manufacturers recommend to see the appearance of Z-shaped steel purlin and C-shaped steel purlin. Different angles. C-shaped steel purlin is 90 degrees, while Z-shaped steel purlin is less than 90 degrees, about 60-75 degrees. Therefore, when purlins are used on roofs with a certain slope, they need to be combined.
考慮到檁條的角度,Z型在坡度較大時可以充分發揮其抗彎能力。如果想在加工過程中把檁條做成連續的構件,那么相比C型鋼檁條,選擇Z型鋼檁條,因?yàn)閆型鋼檁條搭接更方便。
Considering the angle of purlin, Z-shape can give full play to its bending capacity when the slope is large. If you want to make purlins into continuous members during processing, you should choose Z-shaped steel purlins as compared with C-shaped steel purlins, because Z-shaped steel purlins are more convenient to overlap.
在抗彎能力方面,當屋面坡度較小時,Z型鋼檁條的彎曲截面略大于C型檁條,但差別不是特別大。彎曲截面利用率提高,因此Z型鋼檁條適用于坡度較大的屋面。
In terms of bending capacity, when the roof slope is small, the bending section of Z-shaped steel purlin is slightly larger than that of C-shaped purlin, but the difference is not particularly large. The utilization rate of bending section is improved, so Z-shaped steel purlin is suitable for roofs with large slope.
濟南型鋼
那么從截面來看,C型鋼和Z型鋼的強弱軸的力學性能差異較大,與鋼架的連接多采用螺栓連接。搭接實現連接,這樣就可以按連續梁計算,所以從受力狀態、計算結果和結構來看,Z型似乎更合理。
From the cross section, the mechanical properties of the strong and weak shafts of C-section steel and Z-section steel are quite different, and the connection with the steel frame is mostly bolted. The connection is realized by lapping, so it can be calculated as a continuous beam. Therefore, from the stress state, calculation results and structure, Z-type seems to be more reasonable.
因此,除了處理門窗洞口等特殊處理需要外,剛選還是Z型鋼。在整個加工過程中,C型鋼可用于擱板坡度較小的墻檁和房檁,Z型鋼檁適用于擱板坡度較大的屋面檁條,使屋面荷載力得到緩解。Z形檁條截面。
Therefore, in addition to special treatment needs such as handling door and window openings, Z-shaped steel is just selected. In the whole processing process, C-shaped steel can be used for wall purlins and room purlins with small shelf slope, and Z-shaped steel purlins are suitable for roof purlins with large shelf slope, so that the roof load can be relieved. Z-shaped purlin section.
濟南型鋼廠家認為無論是C型鋼還是Z型鋼,只要放在合適的位置就可以充分發揮作用。對于整個部件的加工,項目中需要用到這兩種原材料。只要原材料合格,就可以加工達標零件。
Jinan section steel manufacturers believe that both C-section steel and Z-section steel can play a full role as long as they are placed in a suitable position. For the processing of the whole part, these two raw materials are required in the project. As long as the raw materials are qualified, the qualified parts can be processed.
以上就是今天為大家分享的關于問題的相關內容,希望對大家能有所幫助,想要了解更多內容可以電話聯系我們或者關注我們的網站http://plisse.cn
The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://plisse.cn 。