亚洲一区播放,波多野结衣被躁,中日韩高清在线观看的,三上悠亚免费视频

從事濟南彩鋼板房,彩鋼瓦,復合板,巖棉板,C型鋼,濟南鋼結構的廠家
服務電話:0531-83658718
熱門搜索:濟南方管,濟南彩鋼瓦,濟南巖棉板,濟南型鋼,濟南樓承板,濟南泡沫復合板
行業資訊 所在位置- 首頁-新聞中心-行業資訊H型鋼與工字鋼的區別和用途說明

H型鋼與工字鋼的區別和用途說明

發布時間:2023-02-25 來源:http://plisse.cn/

很多人認為工字鋼是國內的叫法,H型鋼是國外的叫法,其實這個認知是錯誤的。H型鋼和工字鋼從形狀上來說是不一樣的,下面濟南型鋼廠家來講講H型鋼與工字鋼的區別和用途說明。
Many people think that I-beam is a domestic term and H-beam is a foreign term. In fact, this cognition is wrong. H-beam and I-beam are different from each other in terms of shape. Next, Jinan section steel manufacturer will talk about the differences and uses of H-beam and I-beam.
1、工字型鋼不論是普通型還是輕型的,由于截面尺寸均相對較高、較窄,故對截面兩個主軸的慣性矩相差較大,因此,一般僅能直接用于在其腹板平面內受彎的構件或?qū)⑵浣M成格構式受力構件。對軸心受壓構件或在垂直于腹板平面還有彎曲的構件均不宜采用,這就使其在應用范圍上有著很大的局限。
1. The moment of inertia of the two principal axes of the section is relatively different due to the relatively high and narrow section size of the I-shaped steel, whether it is ordinary or light, so it can only be directly used for members bent in the plane of its web or to form a lattice load-bearing member. It is not suitable for axial compression members or members with bending perpendicular to the plane of the web, which limits its application.
2、H型鋼屬于高效經濟截面型材(其它還有冷彎薄壁型鋼、壓型鋼板等),由于截面形狀合理,它們能使鋼材更高地發揮效能,提高承裁能力。不同于普通工字型的是H型鋼的翼緣進行了加寬,且內、外表面通常是平行的,這樣可便于用高強度螺栓和其他構件連接。其尺寸構成合理系列,型號齊全,便于設計選用(除了吊車梁用工字型鋼) 。
2. H-shaped steel is an efficient and economical section profile (other cold-formed thin-walled steel, profiled steel, etc.). Because of the reasonable section shape, they can make the steel more efficient and improve the cutting capacity. What is different from the common I-shaped steel is that the flange of H-shaped steel is widened, and the inner and outer surfaces are usually parallel, which makes it easy to connect with other components with high-strength bolts. Its size composition is reasonable and its model is complete, which is convenient for design and selection (except for I-shaped steel for crane beam).
3、H型鋼的翼緣都是等厚度的,有軋制截面,也有由3塊板焊接組成的組合截面。工字鋼都是軋制截面,由于生產工藝差,翼緣內邊有1:10坡度。H型鋼的軋制不同于普通工字鋼僅用一套水平軋輥,由于其翼緣較寬且無斜度(或斜度很小),故須增設一組立式軋輥同時進行輥軋,因此,其軋制工藝和設備都比普通軋機復雜。國內可生產的大軋制H型鋼高度為800mm,超過了只能是焊接組合截面。
3. The flange of H-beam is of equal thickness, with rolling section and combined section composed of three plates welded. All I-beams are rolled sections. Due to poor production technology, the inner edge of the flange has a 1:10 slope. The rolling of H-beam is different from that of ordinary I-beam with only one set of horizontal rollers. Because of its wide flange and no slope (or small slope), it is necessary to add a set of vertical rollers to roll at the same time. Therefore, its rolling process and equipment are more complex than ordinary rolling mill. The height of the large rolled H-shaped steel that can be produced in China is 800mm, which is more than the welded composite section.
濟南型鋼
4.工字鋼的邊長小,高度大,只能承受單方向的力。
4. The side length of I-beam is small and the height is large, and it can only bear the force in one direction.
5.H型鋼槽深,厚度大,可以承受兩個方向的力。
5. The H-shaped steel groove is deep and thick, and can bear the force in two directions.
6.隨著鋼結構建筑的發展需要,只有工字鋼是不行的,還要加厚工字鋼,用于承重柱容易失穩。
6. With the development of steel structure buildings, only I-beam is not feasible, and I-beam should be thickened, which is easy to lose stability when used for load-bearing columns.
7.工字鋼只能用于橫梁,而H型鋼才能用于結構的承重柱。
7. I-beams can only be used for beams, while H-beams can only be used for load-bearing columns of structures.
8.H型鋼是一種斷面力學性能較工字鋼優良的經濟型斷面鋼材,因其斷面的形狀與英文字母“H”相同而得名。熱軋H型鋼的翼緣比工字鋼寬、側向剛度大、抗彎能力強。同等規格下H型鋼理重較工字鋼輕。
8. H-shaped steel is an economic section steel with better mechanical properties than I-shaped steel. It is named because its section shape is the same as the English letter "H". The flange of hot-rolled H-beam is wider than that of I-beam, with large lateral stiffness and strong bending resistance. The weight of H-shaped steel is lighter than I-shaped steel under the same specification.
9.工字鋼翼緣是變斷面靠腹板部厚,外部??;H型鋼的翼緣是等斷面。
9. The flange of I-beam is thick at the web of variable section and thin at the outside; The flange of H-shaped steel is of equal section.
H型鋼與工字鋼的區別和用途說明相關內容就講解到這里了,您對此有怎樣的疑惑或者需求就來我們網站http://plisse.cn咨詢吧!
This is the difference between H-shaped steel and I-shaped steel and the use description. If you have any doubts or needs about this, please come to our website http://plisse.cn Ask!